|
It is currently Mon Nov 16, 2026 12:13 am
|
View unanswered posts | View active topics
 |
|
 |
|
|
88delta88
|
 Posted: Fri Nov 18, 2005 9:45 am |
| TOC Village Idiot |
 |
 |
Joined: Mon Jun 09, 2003 5:06 pm Posts: 2415 Images: 40 Location: Canada
|
Typical fog lamps wont draw more than 20A. If you use a 20A fuse you should be fine.
The biggest part of the install will be running the wires properly, so you cant see them, and so that nothing will break or wear over time.
Then, finding a good solid place to mount the lights to, so that parking lots wont rip them off. Fairly straight-forward as far as installs go, the lamps should have come with a wiring harness, and possibly a relay.
I dont think you should have a problem getting them in - if they dont work, you didnt hook them up right 
_________________ "I know that you believe that you understood what you think I said, but I am not sure you realize that what you heard is not what I meant."
http://www.cardomain.com/id/88delta88
|
|
|
|
 |
|
strokercutlass
|
 Posted: Fri Nov 25, 2005 1:53 am |
| TOC Mechanic |
 |
 |
Joined: Mon Jun 09, 2003 12:17 am Posts: 378 Images: 13 Location: Wis
|
|
One other thing to mention....with driving lights and the like, a relay is ALWAYS a good idea to use...reason being that there will be less draw on the wire going from the power tap to the switch, and less draw on the wire from the switch to the lights, thereby lessening the chance of an overheat condition or electrical fire.
A relay is actually easy to install, plus it will allow more power to the lights when mounted fairly close, due to less voltage drop in the line between the power and the lights.
You will want the relay mounted somewhere up front, fairly close to the lights, yet protected from damage. There are 4 contacts on a normal light relay.....one is a ground, one is the power coming into the relay, one is the power going to the lights, and the 4th is the power coming from the switch to activate the relay.
By using a relay, you can run a smaller gauge wire with less draw from the switch to the relay...the majority of the draw (voltage and amperage) will be between the relay and the lights.
Just something to think about....Autozone as well as others carry light relays, and most companies recommend the use of a relay for aftermarket driving and fog lights, both for safety as well as better lighting.
_________________ Shawn's Auto Repair and Performance, SW Wis.
www.shawnsautorepair.procarcarezone.com
69 Olds Cutlass S
70 Olds Vista Cruiser Wagon
72 Olds Cutlass S, 12:1 470 stroker, JM40 solid lifter cam, TH400, 3500 10" PTC stall, 4.11 posi
74 442 455/TH350
79 Cutlass 455/TH375 sleeper
'97 GMC Sierra Ext Cab 9" lift w/ 37's
|
|
|
|
 |
|
|
 |
|
 |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum
|
|