It is currently Wed Nov 18, 2026 8:01 am

All times are UTC - 5 hours





 Page 1 of 1 [ 5 posts ] 
Author Message
PostPosted: Sat Feb 05, 2005 7:56 pm 
TOC Member
TOC Member
User avatar

Joined: Fri Nov 26, 2004 12:46 am
Posts: 6
Images: 2
I have a cutlass take has a small stream of coolant that seems to be running down the side of my intake. It's located on the passanger side on the front of the intake, but it seems to be coming out the back of a bolt holding a bracket. Any idea how too correct this. Is it a blown intake gasket or does the bolt holding the bracket have a gasket or something that can be replaced. Plus there is no water in the oil, doesn't smoke, or run hot.


Offline
 Profile Personal album  
 
 Post subject:
PostPosted: Sat Feb 05, 2005 9:49 pm 
TOC Admin
TOC Admin
User avatar

Joined: Fri Jun 06, 2003 3:58 pm
Posts: 3166
Images: 29
Location: Michigan, USA
Sounds like you're talking about the thermostat? There's a bolt holding a bracket that surrounds the upper radiator hose. Yes, there is a gasket there! Just replace your thermostat (while you're in there, they're cheap), it will usually include a gasket with it.

TOC Admin
Brando



_________________
1999 Oldsmobile Intrigue GLS
1987 Oldsmobile Delta 88 Royale
Offline
 Profile Personal album  
 
 Post subject:
PostPosted: Sun Feb 06, 2005 6:44 pm 
TOC Admin
TOC Admin
User avatar

Joined: Fri Jun 06, 2003 3:58 pm
Posts: 3166
Images: 29
Location: Michigan, USA
Also, it could be something as simple as the hose clamp not being tight enough, might need to replace the clamp. On the neck that the upper radiator hose clamps onto, there is an O-ring there, it could be that too! You should be able to get that from your local auto parts store.

TOC Admin
Brando



_________________
1999 Oldsmobile Intrigue GLS
1987 Oldsmobile Delta 88 Royale
Offline
 Profile Personal album  
 
 Post subject: Found the problem
PostPosted: Tue Feb 08, 2005 2:24 pm 
TOC Member
TOC Member
User avatar

Joined: Fri Nov 26, 2004 12:46 am
Posts: 6
Images: 2
I found a hair line crack in my intake manifold. I did a temp. fix with jb weld until I can get another one.


Offline
 Profile Personal album  
 
 Post subject: Re: Found the problem
PostPosted: Tue Feb 08, 2005 3:38 pm 
TOC Admin
TOC Admin
User avatar

Joined: Fri Jun 06, 2003 3:58 pm
Posts: 3166
Images: 29
Location: Michigan, USA
tj32643 wrote:
I found a hair line crack in my intake manifold.


Yep, that'll do it too! :lol:
Sounds like a trip to the junk yard is in store for you.

TOC Admin
Brando



_________________
1999 Oldsmobile Intrigue GLS
1987 Oldsmobile Delta 88 Royale
Offline
 Profile Personal album  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 5 posts ] 


All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: