It is currently Fri Mar 29, 2024 5:43 am

All times are UTC - 5 hours





 Page 1 of 2 [ 23 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Rear View Mirror...
PostPosted: Mon May 28, 2007 1:12 am 
TOC Admin
TOC Admin
User avatar

Joined: Fri Jun 06, 2003 3:58 pm
Posts: 3166
Images: 29
Location: Michigan, USA
Got in my car today...well, yesterday now...anyways...

Opened the door, sat down....rear view mirror was hanging from the wires... :lol: :doh:

Must have been the recent heat we had and the whole black cars absorb the most heat that did it...

So what do you do in this situation? I'm so lost without it, I use my mirrors a lot... :D

Browsed around the internet, looks like NAPA carries a rear view mirror adhesive kit, a two part epoxy. Probably the same thing as the JB-WELD Mirror Weld that I've seen, just repackaged by NAPA.

My current plan is to have someone hold the rear view mirror in place, while I trace around it with washable marker on the outside of the window. Then I guess I'll remove the old adhesive tab that's stuck on the windshield....doesn't appear to be anything stuck on the rear view mirror itself. Must not of primed/cleaned it very well before they stuck it on from the factory. Then simply follow the directions on the packaging...

Never had this happen before.....must of been my system, all that bass made it rattle off....lmao...


TOC Admin
Brando



_________________
1999 Oldsmobile Intrigue GLS
1987 Oldsmobile Delta 88 Royale
Offline
 Profile Personal album  
 
 Post subject: Re: Rear View Mirror...
PostPosted: Mon May 28, 2007 1:44 pm 
TOC Member
TOC Member
User avatar

Joined: Sun May 15, 2005 5:50 pm
Posts: 690
Images: 6
Location: Mississippi
My old Delta's always fell off. I finally just used half the glue and really pressed on that sucker. Never came off again :lol: I always tried to line it up in the middle best I can. Last time I did it, it was slightly crooked :blush:


Offline
 Profile Personal album  
 
 Post subject: Re: Rear View Mirror...
PostPosted: Mon May 28, 2007 5:16 pm 
TOC Moderator
TOC Moderator
User avatar

Joined: Wed May 18, 2005 5:42 pm
Posts: 1297
Images: 2
Location: Ames, IA
There should be a tab that comes off of that... My lumina uses a t-20 torx to remove the 'button'. If there is still an adhesive residue on the windshield, you can use that to trace around too.

Hope this helps,

Andrew



_________________
Andrew
TOC Moderator

Mark Twain wrote:
A man's character may be learned from the adjectives which he habitually uses in conversation.
Offline
 Profile Personal album  
 
 Post subject: Re: Rear View Mirror...
PostPosted: Mon May 28, 2007 5:54 pm 
TOC Admin
TOC Admin
User avatar

Joined: Fri Jun 06, 2003 3:58 pm
Posts: 3166
Images: 29
Location: Michigan, USA
No screws...cept for one philips, but that just removed the cover for the compass coil thingy mabobber.

There's two plastic tabs that hold it in place that need to be moved....looks like someone did this before, as there are marks where I assume you put some special tool in there, this person used two screwdrivers from the looks of it, and probably what I will do too...

TOC Admin
Brando



_________________
1999 Oldsmobile Intrigue GLS
1987 Oldsmobile Delta 88 Royale
Offline
 Profile Personal album  
 
 Post subject: Re: Rear View Mirror...
PostPosted: Mon May 28, 2007 6:01 pm 
TOC Admin
TOC Admin
User avatar

Joined: Fri Jun 06, 2003 3:58 pm
Posts: 3166
Images: 29
Location: Michigan, USA
hmm...maybe not, when I unclip those...it takes the whole mirror with it....

where was this torx screw located?

TOC Admin
Brando



_________________
1999 Oldsmobile Intrigue GLS
1987 Oldsmobile Delta 88 Royale
Offline
 Profile Personal album  
 
 Post subject: Re: Rear View Mirror...
PostPosted: Mon May 28, 2007 6:15 pm 
TOC Moderator
TOC Moderator
User avatar

Joined: Wed May 18, 2005 5:42 pm
Posts: 1297
Images: 2
Location: Ames, IA
It was located on the back side of the mirror mount, by where the ball joint for adjustment is.

It may be different, as my car is alot older than yours. I would check to see if that is just a fascia that is there to make the mirror mount area look good, and to hide the wires though.

Andrew



_________________
Andrew
TOC Moderator

Mark Twain wrote:
A man's character may be learned from the adjectives which he habitually uses in conversation.
Offline
 Profile Personal album  
 
 Post subject: Re: Rear View Mirror...
PostPosted: Mon May 28, 2007 6:30 pm 
TOC Admin
TOC Admin
User avatar

Joined: Fri Jun 06, 2003 3:58 pm
Posts: 3166
Images: 29
Location: Michigan, USA
yea....it is just a plastic cover, to hide the compass and such....

I removed it anyways, and it looks like one piece....no torx screw there.

I'm not sure what to do...might just end up bringing it to a shop.... :doh:

TOC Admin
Brando



_________________
1999 Oldsmobile Intrigue GLS
1987 Oldsmobile Delta 88 Royale
Offline
 Profile Personal album  
 
 Post subject: Re: Rear View Mirror...
PostPosted: Mon May 28, 2007 6:38 pm 
TOC Admin
TOC Admin
User avatar

Joined: Fri Jun 06, 2003 3:58 pm
Posts: 3166
Images: 29
Location: Michigan, USA
looked at the delta's rear view mirror...I see the torx screw you're talking about...mine isn't like that...

TOC Amin
Brando



_________________
1999 Oldsmobile Intrigue GLS
1987 Oldsmobile Delta 88 Royale
Offline
 Profile Personal album  
 
 Post subject: Re: Rear View Mirror...
PostPosted: Mon May 28, 2007 7:46 pm 
TOC Moderator
TOC Moderator
User avatar

Joined: Sun Jun 08, 2003 12:28 am
Posts: 1020
Images: 14
Location: Western Massachusetts
yea, mine's fallen off once or twice, both in my delta and in my 91 K1500, both mirrors work the same and are really easy to re-attach, sounds like yours might be more complicated though :confused:



_________________
Eric
Image
73 Olds Delta 88 Royale
Offline
 Profile Personal album  
 
 Post subject: Re: Rear View Mirror...
PostPosted: Mon May 28, 2007 8:56 pm 
TOC Admin
TOC Admin
User avatar

Joined: Fri Jun 06, 2003 3:58 pm
Posts: 3166
Images: 29
Location: Michigan, USA
Didn't think to check my print service manuals....of course they talk about it....

Says the support just pops out with a flat blade tool....aka a screwdriver...not sure how, just says to use a flat blade tool, so must not be too hard... :lol:

TOC Admin
Brando



_________________
1999 Oldsmobile Intrigue GLS
1987 Oldsmobile Delta 88 Royale
Offline
 Profile Personal album  
 
 Post subject: Re: Rear View Mirror...
PostPosted: Mon May 28, 2007 9:27 pm 
TOC Admin
TOC Admin
User avatar

Joined: Fri Jun 06, 2003 3:58 pm
Posts: 3166
Images: 29
Location: Michigan, USA
Using my fiber optic attachment on my maglite....I can see underneath the support tab, the tab itself is attached to a spring clip, I need to use a small screwdriver that fits inbetween the clip and press up on it to slide it out....so far my screwdrivers keep bending.... :lol:

TOC Admin
Brando



_________________
1999 Oldsmobile Intrigue GLS
1987 Oldsmobile Delta 88 Royale
Offline
 Profile Personal album  
 
 Post subject: Re: Rear View Mirror...
PostPosted: Mon May 28, 2007 10:31 pm 
TOC Admin
TOC Admin
User avatar

Joined: Fri Jun 06, 2003 3:58 pm
Posts: 3166
Images: 29
Location: Michigan, USA
I GOT THE TAB OUT!

:lol:

It was a two person job....I'll post some pictures up in a minute as "tutorial" kind of....


TOC Admin
Brando



_________________
1999 Oldsmobile Intrigue GLS
1987 Oldsmobile Delta 88 Royale
Offline
 Profile Personal album  
 
 Post subject: Re: Rear View Mirror...
PostPosted: Mon May 28, 2007 11:12 pm 
TOC Admin
TOC Admin
User avatar

Joined: Fri Jun 06, 2003 3:58 pm
Posts: 3166
Images: 29
Location: Michigan, USA
OK...

First of all, here are the tools I used:

Image
Clamping Work Table - sure am lucky to have this thing...wouldn't have been able to do it without it I don't think...without breaking or seriously messing up the mirror anyways.
2 Large Flathead Screwdrivers - one is used in a turn motion to push the support tab out, the other is used to press down on the spring clip, so the tab can slide out.

Here is a picture with the plastic cover removed, and you can see the compass sensor dangling from the wires.
Image

You'll need two people for this operation...if you can do it by yourself, you are very talented. First you want to clamp it in your wooden clamping table so that you have only the support part of the mirror sticking up....if you don't have one of these tables, get one... :lol:

One person pushes down on the spring clip, where the red is pointing, with a large flathead screwdriver. The other person turns a large flathead screwdriver in between the area where the blue is pointing to push the tab out. Once the spring clip is pushed down enough, the tab can be pushed over those two little bumps you see in the picture, located on the spring clip.

Here is a picture of the support tab finally removed, and the mirror is still in one piece. Now to screw the plastic parts back on (compass sensor), you'll want to remove these when working on it....so you don't break them. Installation should be just pressing the mirror against the tab and sliding it on....hopefully.
Image

Making a trip to NAPA tomorrow to buy the adhesive kit...

:rock:

TOC Admin
Brando



_________________
1999 Oldsmobile Intrigue GLS
1987 Oldsmobile Delta 88 Royale
Offline
 Profile Personal album  
 
 Post subject: Re: Rear View Mirror...
PostPosted: Mon May 28, 2007 11:16 pm 
TOC Admin
TOC Admin
User avatar

Joined: Fri Jun 06, 2003 3:58 pm
Posts: 3166
Images: 29
Location: Michigan, USA
On another note...I have no idea what the hell the service manual was talking about...I see no way to do this with I quote "a small flat-bladed tool."

-1 for the service manual.

TOC Admin
Brando



_________________
1999 Oldsmobile Intrigue GLS
1987 Oldsmobile Delta 88 Royale
Offline
 Profile Personal album  
 
 Post subject: Re: Rear View Mirror...
PostPosted: Tue May 29, 2007 12:41 am 
TOC Admin
TOC Admin
User avatar

Joined: Fri Jun 06, 2003 3:58 pm
Posts: 3166
Images: 29
Location: Michigan, USA
Prepped the tab...

Sanded with 320 grit (fine emery cloth) and gave it a good cleaning with acetone.

My guess is when they re-glued it, they skipped the sanding part (sanding is listed in the service manual)....the tab looked pretty smooth before.

TOC Admin
Brando



_________________
1999 Oldsmobile Intrigue GLS
1987 Oldsmobile Delta 88 Royale
Offline
 Profile Personal album  
 
Display posts from previous:  Sort by  
 Page 1 of 2 [ 23 posts ]  Go to page 1, 2  Next


All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  

cron