It is currently Fri Nov 20, 2026 3:05 pm

All times are UTC - 5 hours





 Page 1 of 1 [ 8 posts ] 
Author Message
 Post subject: Tranny Troubles
PostPosted: Thu Jul 08, 2004 3:02 pm 
TOC Member
TOC Member

Joined: Sun May 02, 2004 2:15 pm
Posts: 6
Location: Macon, GA
My tranny has been acting up. It just stopped pulling. I left it in a parking lot that night. When I came back the next morning, the car went into gear and I made it about 4 blocks and it stopped pulling again. I think it may be a broken band, but I don't think the tranny is totally f*&^ed up. So does anyone have any suggestions on what is wrong.


Offline
 Profile  
 
 Post subject:
PostPosted: Thu Jul 08, 2004 3:44 pm 
TOC Member
TOC Member

Joined: Sun Sep 21, 2003 1:20 am
Posts: 207
Images: 8
Location: South NJ
What does the tranny fluid look like? Change the tranny filter too, that might help



_________________
Jake 19/m
1972 Olds 442 - 350/th350/3.73 posi - Project "C6 Killa"
1985 Olds Cutlass Supreme - 231/th200c/2.41 peg leg - winter beater
1972 Olds Cutlass- Parts car
www.cardomain.com/id/psycodiver69
Offline
 Profile Personal album  
 
 Post subject:
PostPosted: Thu Jul 08, 2004 4:02 pm 
TOC Village Idiot
TOC Village Idiot
User avatar

Joined: Mon Jun 09, 2003 5:06 pm
Posts: 2415
Images: 40
Location: Canada
see if there IS tranny fluid... I had a caddy that did the same thing, but it was because there wasnt enough fluid for the tranny to pick up.



_________________
"I know that you believe that you understood what you think I said, but I am not sure you realize that what you heard is not what I meant."

http://www.cardomain.com/id/88delta88
Offline
 Profile Personal album  
 
 Post subject:
PostPosted: Thu Jul 08, 2004 4:34 pm 
TOC Member
TOC Member

Joined: Sun May 02, 2004 2:15 pm
Posts: 6
Location: Macon, GA
The tranny stick says it is full. I thought it was that also. And before that happened, my torque converter had unscrewed itself from the flywheel. I tightened it as well.


Offline
 Profile  
 
 Post subject:
PostPosted: Sat Jul 10, 2004 12:20 am 
TOC Member
TOC Member
User avatar

Joined: Tue Jun 10, 2003 1:00 am
Posts: 188
Images: 38
Location: Columbus Ohio
stephancook36647 wrote:
The tranny stick says it is full. I thought it was that also. And before that happened, my torque converter had unscrewed itself from the flywheel. I tightened it as well.

how exactly does that happen and what happens when that happens?



_________________
http://www.cardomain.com/id/88ciera_sc

1988 Cutlass Ciera SC
3.8L Sequential Fuel Injection
Horsepower- 160 @ 4000 RPM<factory lie
Torque(lb-ft)-215 @ 2750 RPM
Displacement- 3802cc
4 Speed Automatic

This WAS My Dad's Oldsmobile
Offline
 Profile Personal album  
 
 Post subject:
PostPosted: Mon Jul 12, 2004 8:57 am 
TOC Village Idiot
TOC Village Idiot
User avatar

Joined: Mon Jun 09, 2003 5:06 pm
Posts: 2415
Images: 40
Location: Canada
I would have to say that a torque converter unscrewing itself from the flywheel is not normal??? You may have some big problems...



_________________
"I know that you believe that you understood what you think I said, but I am not sure you realize that what you heard is not what I meant."

http://www.cardomain.com/id/88delta88
Offline
 Profile Personal album  
 
 Post subject:
PostPosted: Mon Jul 12, 2004 2:31 pm 
TOC Member
TOC Member
User avatar

Joined: Wed Jun 25, 2003 10:23 pm
Posts: 350
Images: 18
Location: Ontario, Canada
9 out of 10 transmissions fail due to overheating. Thats why i just installed a tranny cooler on the weekend its sweet, really easy to install lots of space to with, i took of the front grile for better access i placed it in front of the ac condensor for 100% effencity. Read up on tranny coolers lowering the temp can double life of ur tranny supposely.



_________________
1985 Oldsmobile Cutlass Ciera
3.8L (231) V6 MPFI
AC Delco Rapidfire Spark Plugs
Accel Brute Thunder HEI Super Coil
Accel Ignition Module
MSD Rotor
Hypertech 180F Thermostat
Mister Transmission Fluid Cooler
Cool Collar Oil Filter Cooler
Offline
 Profile Personal album  
 
 Post subject:
PostPosted: Mon Jul 12, 2004 4:17 pm 
TOC Member
TOC Member
User avatar

Joined: Mon Feb 16, 2004 4:44 pm
Posts: 269
Location: Lees Summit MO
I think that on most V8s the torque converter is bolted to the flywheel by three pretty hefty bolts, not familiar with any that are screwed on.



_________________
'46 sixty series 2 dr fastback
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 8 posts ] 


All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: