It is currently Fri Nov 20, 2026 12:53 pm

All times are UTC - 5 hours





 Page 1 of 1 [ 5 posts ] 
Author Message
 Post subject: wheel bearings
PostPosted: Sat Jun 05, 2004 12:59 am 
TOC Member
TOC Member
User avatar

Joined: Thu Apr 22, 2004 8:31 pm
Posts: 317
Images: 2
Location: Pataskala, OH
my wheel bearings are going out i think. When i turn the wheel there is this god awful squeek. Are the wheel bearings hard to do i know its all one piece i was just wondering if it is something i can do. I have a haynes manual and everything....


Offline
 Profile Personal album  
 
 Post subject:
PostPosted: Mon Jun 07, 2004 8:07 am 
TOC Member
TOC Member

Joined: Sat Jan 31, 2004 7:34 pm
Posts: 61
Location: corydon, indiana
well mine was going out on the front passanger side of the car and i just replaced the hub assembley. i would just do that then all of that shit is new.



_________________
Rusty Froman
President and Founder of Simply Irresistible Car Club
http://sicc6.tripod.com

http://www.cardomain.com/memberpage/347561
Offline
 Profile  
 
 Post subject:
PostPosted: Wed Jun 09, 2004 7:01 am 
TOC Member
TOC Member
User avatar

Joined: Mon Feb 16, 2004 4:44 pm
Posts: 269
Location: Lees Summit MO
usually when a wheel bearing fails the sound is more heavy than a squeak. I would inspect your front discs, see if they are worn and the wear indicator is what you hear squeaking.



_________________
'46 sixty series 2 dr fastback
Offline
 Profile  
 
 Post subject:
PostPosted: Wed Jun 09, 2004 3:09 pm 
TOC Member
TOC Member
User avatar

Joined: Thu Apr 22, 2004 8:31 pm
Posts: 317
Images: 2
Location: Pataskala, OH
no its not the brakes they are fine....they squeek not when i am pushing on the brake but when i am driving it is a constant squeek


Offline
 Profile Personal album  
 
 Post subject:
PostPosted: Wed Jun 09, 2004 8:05 pm 
TOC Mechanic
TOC Mechanic
User avatar

Joined: Mon Jun 09, 2003 12:17 am
Posts: 378
Images: 13
Location: Wis
Justin, just because you're not pressing on the brake doesn't mean it couldn't be the brakes themselves. As OldsGuy said, when a wheel bearing or hub assembly begins going bad, it makes more of a drumming or grinding sound, usually more noticeable when turning one direction or another. Squeaking is generally associated with brakes, and the "squeakers" built into the brake pads will often squeak when the brakes are not applied, then will quiet down when the brakes are depressed. In many cases the brakes will squeak if the wheel is turned, usually caused by flex in the brake rotor or the pads squeaking against a rust lip on the edge of the brake rotor. Pull the front wheels and be certain before you blindly go into replacing a hub assembly, just to be sure. Also, in regards to installing the hub assembly yourself, it can be done, although you'll need a spindle nut socket, 1/2" drive torque wrench which can go up to 125-150 ft. lbs, as the axle nut needs to be properly torqued after the hub is installed and the axle nut screwed on, possibly some torx or allen wrenches or sockets depending on the style bolts holding the caliper and caliper mounting bracket, wrenches and/or sockets in the appropriate sizes, and possibly a hammer and chisel to separate the hub assembly from the spindle.



_________________
Shawn's Auto Repair and Performance, SW Wis.
www.shawnsautorepair.procarcarezone.com

69 Olds Cutlass S
70 Olds Vista Cruiser Wagon
72 Olds Cutlass S, 12:1 470 stroker, JM40 solid lifter cam, TH400, 3500 10" PTC stall, 4.11 posi
74 442 455/TH350
79 Cutlass 455/TH375 sleeper
'97 GMC Sierra Ext Cab 9" lift w/ 37's
Offline
 Profile Personal album  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 5 posts ] 


All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: