It is currently Tue Jun 16, 2026 7:15 am

All times are UTC - 5 hours





 Page 1 of 1 [ 6 posts ] 
Author Message
 Post subject: Driver side window
PostPosted: Wed Oct 12, 2005 7:37 pm 
TOC Member
TOC Member

Joined: Wed Oct 12, 2005 12:40 am
Posts: 37
Location: moorseville
hey guyz ever since i bought my ciera the driver side window has not worked right ive heard this has happend with quite a few olds basically u role it down and its goin by itself and it stops about halfway or so on the way down u press the switch again and nothing happens ive noticed the longer u let it set without touching the switch the further the window will move so for about 9 months or so ive just been helping it up and down and it seems to work i may have the problem fixed 2morow as im taking it to my school to work on if any of you know what this is plz tell me so i may be able to get it fixed instead of checkin all the stuff for 2 hours before i diagnose the problem thx -Intimidator68


Offline
 Profile  
 
 Post subject:
PostPosted: Wed Oct 12, 2005 7:58 pm 
TOC Member
TOC Member
User avatar

Joined: Sun May 15, 2005 5:50 pm
Posts: 690
Images: 6
Location: Mississippi
Wow, that was very hard to read, no offense. Anyways, sounds like the window motor is on its way out or could be a bad switch. About the same thing is happening to my Delta, so I know how irritating it is.


Offline
 Profile Personal album  
 
 Post subject: Re: Driver side window
PostPosted: Thu Oct 13, 2005 12:33 am 
TOC Moderator
TOC Moderator
User avatar

Joined: Wed May 18, 2005 5:42 pm
Posts: 1297
Images: 2
Location: Ames, IA
Intimidator68 wrote:
hey guyz ever since i bought my ciera the driver side window has not worked right ive heard this has happend with quite a few olds basically u role it down and its goin by itself and it stops about halfway or so on the way down u press the switch again and nothing happens ive noticed the longer u let it set without touching the switch the further the window will move so for about 9 months or so ive just been helping it up and down and it seems to work i may have the problem fixed 2morow as im taking it to my school to work on if any of you know what this is plz tell me so i may be able to get it fixed instead of checkin all the stuff for 2 hours before i diagnose the problem thx -Intimidator68


It could be anyone of the components in that circut. It is impossible to tell over the net what it is, as it could be as simple as a wire or ground or as major as a motor. That also includes the mechanism the motor operates. Sorry I cant help, but remember to start simple.

Andrew



_________________
Andrew
TOC Moderator

Mark Twain wrote:
A man's character may be learned from the adjectives which he habitually uses in conversation.
Offline
 Profile Personal album  
 
 Post subject:
PostPosted: Thu Oct 13, 2005 12:46 am 
TOC Member
TOC Member

Joined: Wed Oct 12, 2005 12:40 am
Posts: 37
Location: moorseville
that is what i will be doing. i knew it could be a number of things. i was just hoping that it was a more common problem with the a-bodys (like somethin that might have been recalled in a since) but i guess not everything comes ez. -intimidator68


Offline
 Profile  
 
 Post subject:
PostPosted: Thu Oct 13, 2005 1:35 am 
TOC Member
TOC Member
User avatar

Joined: Sun Jun 20, 2004 1:39 pm
Posts: 67
Location: San Antonio, TX
My old Jeep Larado burned out a window motor after running slowly for a while. When I took the door apart (shoulda done it months before :blush: ) I found the track grease had turned into a hard and crusty mess in the tracks. Months of poor-to-no track lubrication stressed the motor for too long.

C.J.


Offline
 Profile  
 
 Post subject:
PostPosted: Thu Oct 13, 2005 9:20 pm 
TOC Member
TOC Member

Joined: Wed Oct 12, 2005 12:40 am
Posts: 37
Location: moorseville
Well me and a few of my class mates got to test all the components to the driver side window today. we checked the circuit breaker, pcm, the switch, and they were all good. we checked the motor and it was putting out a very very high amp reading. :( the motor is just worn out. because of the high amps it was tripping the circuit breaker after about 3 or 4 seconds of use. i wish it was somethin simple as in a loose connector but cant get everything ur way. -Intimidator68

p.s. how much will a new window motor cost. thx


Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 6 posts ] 


All times are UTC - 5 hours


Who is online

Users browsing this forum: Google [Bot] and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: