It is currently Fri Nov 20, 2026 1:51 pm

All times are UTC - 5 hours





 Page 1 of 1 [ 9 posts ] 
Author Message
 Post subject: Oil Leaking?
PostPosted: Wed Jun 30, 2004 8:56 pm 
TOC Member
TOC Member

Joined: Wed Jun 30, 2004 8:18 pm
Posts: 23
Images: 4
Location: Ohio
Hey all, I have a 1983 Toronado with the 307 in it. I've noticied that oil is seeping out the right side of the engine between the 2 middlie spark plugs. A friend suggested tightening the bolts on the head gasket. I'm not really sure what to do. The car has 63,000 miles on it (original). Any advice is appriciated.

Thanks!


Offline
 Profile Personal album  
 
 Post subject:
PostPosted: Wed Jun 30, 2004 9:12 pm 
TOC Admin
TOC Admin
User avatar

Joined: Fri Jun 06, 2003 3:58 pm
Posts: 3166
Images: 29
Location: Michigan, USA
These bolts have a certain sequence and torque rating that they are supposed to be tightened down to. Tightening one bolt down too much wouldn't be good. Sounds like your Head Gasket is going bad and you should get that replaced as soon as possible, and don't drive it around to much like that...don't want to end up running your engine dry, with no oil.

TOC Admin
Brando



_________________
1999 Oldsmobile Intrigue GLS
1987 Oldsmobile Delta 88 Royale
Offline
 Profile Personal album  
 
 Post subject:
PostPosted: Wed Jun 30, 2004 11:38 pm 
TOC Mechanic
TOC Mechanic
User avatar

Joined: Mon Jun 09, 2003 12:17 am
Posts: 378
Images: 13
Location: Wis
Are you sure its where the cylinder head meets the block, or is it possibly leaking down from the valve cover? The newer 5 bolt valve covers had notorious problems with valve cover leakage, and with all the smog garbage on the engine, its sometimes difficult to be exact, especially on the right side, with the A/C compressor and everything else there. Just another thought....



_________________
Shawn's Auto Repair and Performance, SW Wis.
www.shawnsautorepair.procarcarezone.com

69 Olds Cutlass S
70 Olds Vista Cruiser Wagon
72 Olds Cutlass S, 12:1 470 stroker, JM40 solid lifter cam, TH400, 3500 10" PTC stall, 4.11 posi
74 442 455/TH350
79 Cutlass 455/TH375 sleeper
'97 GMC Sierra Ext Cab 9" lift w/ 37's
Offline
 Profile Personal album  
 
 Post subject:
PostPosted: Thu Jul 01, 2004 10:11 am 
TOC Moderator
TOC Moderator
User avatar

Joined: Sun Jun 08, 2003 12:28 am
Posts: 1020
Images: 14
Location: Western Massachusetts
sounds like it's most likely the valve cover gastket... if it was coming from there it could be dripping over where the heads meet the block and possibly look like that's where it's coming from. Replacing a valve cover gastket isn't a big deal, but as Stroker said, if you have alot of smog junk in the way it can make things more complicated.

if your head bolts were so loose that oil was spewing out of there... well... that would be a whole new set of problems, you're engine would probably run bad or not at all if that was the case.


Last edited by 73Delta88 on Thu Jul 01, 2004 5:36 pm, edited 1 time in total.


_________________
Eric
Image
73 Olds Delta 88 Royale
Offline
 Profile Personal album  
 
 Post subject:
PostPosted: Thu Jul 01, 2004 11:20 am 
TOC Member
TOC Member
User avatar

Joined: Mon Feb 16, 2004 4:44 pm
Posts: 269
Location: Lees Summit MO
Here's the third vote for the valve cover gasket...



_________________
'46 sixty series 2 dr fastback
Offline
 Profile  
 
 Post subject:
PostPosted: Thu Jul 01, 2004 11:45 am 
TOC Member
TOC Member
User avatar

Joined: Sun Jan 04, 2004 2:22 pm
Posts: 1108
Images: 38
Location: East Haven, Connecticut
That sounds like what I had before I changed my valve cover gasket in March, I would check that 1st, mine was made or cork (or something like that) and it was cracked and falling apart. Wasnt hard to do, and it only cost $6 for the gasket (which for my car also came with the egr valve gasket since u have to remove that anyway to get the valve cover off). The new gasket I got is rubber, so it should last longer then the original.



_________________
.

1985 Olds Cutlass Ciera Brougham Holiday Coupe

1988 Olds Cutlass Ciera International Series Sedan

OCA #037778
Offline
 Profile Personal album  
 
 Post subject:
PostPosted: Thu Jul 01, 2004 12:03 pm 
TOC Member
TOC Member

Joined: Wed Jun 30, 2004 8:18 pm
Posts: 23
Images: 4
Location: Ohio
Well.. when it comes to engines.. I'm pretty stupid. My best friend though, is very good with them... I'll let him read it and have him check the valve gasket cover.. I really hope it isn't the head gasket or... this car is probably gonna become a parts car.

Thanks!
Nick


Offline
 Profile Personal album  
 
 Post subject:
PostPosted: Thu Jul 01, 2004 3:23 pm 
TOC Admin
TOC Admin
User avatar

Joined: Fri Jun 06, 2003 3:58 pm
Posts: 3166
Images: 29
Location: Michigan, USA
Hopefully it is the valve cover gasket... :yes:

TOC Admin
Brando



_________________
1999 Oldsmobile Intrigue GLS
1987 Oldsmobile Delta 88 Royale
Offline
 Profile Personal album  
 
 Post subject:
PostPosted: Thu Jul 01, 2004 7:15 pm 
TOC Member
TOC Member
User avatar

Joined: Sun Feb 15, 2004 3:25 am
Posts: 3196
Images: 10
Location: Southern California
nick3012 wrote:
Well.. when it comes to engines.. I'm pretty stupid.
Hi Nick Hi all,
Poor choice of words. As long as one has the desire and ability to learn, one is not stupid. A better phrase might be "I'm just starting out".
Those cork gaskets tend to dry out, shrink, and then split open over the years causing oil leaks.
I just changed them in my '87 ( first time) and my '70 (who knows, I just bought it a year ago).
With a head gasket you would not be concerned about a leak. :lol:
Regards, Norm



_________________
Harry S. Truman wrote:
When you have an efficient government, you have a dictatorship.
Offline
 Profile Personal album  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 9 posts ] 


All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 20 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: